FAQ: How To Install Led Under Cabinet Lighting For Both Sides Of Kitchen?
- 1 Where should LED lights be placed under cabinets?
- 2 Are LED strip lights good for under kitchen cabinets?
- 3 How do you wire LED under cabinet lights?
- 4 How do you connect LED strip lights to mains?
- 5 How many lumens do I need under kitchen cabinets?
- 6 What kind of under-cabinet lighting is best?
- 7 How do I choose an under cabinet light?
- 8 Is under counter lighting worth it?
- 9 Is under cabinet lighting necessary?
- 10 Can you leave LED light strips on all night?
- 11 Can you bend LED strip lights around corners?
- 12 Can you connect LED light strips together?
Where should LED lights be placed under cabinets?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
Are LED strip lights good for under kitchen cabinets?
LED tape light systems or strip systems have the ability to create functional detail lighting that’s perfect for under cabinets.
How do you wire LED under cabinet lights?
Wire Inside the Cabinet Measure, cut, and add extensions to enough LED tape to cover the underside of the cabinet above the sink. Push the wires through the hole in the taller cabinet. Twist together the two stripped positive wires and secure them with low-voltage wiring nuts.
How do you connect LED strip lights to mains?
How do I install my LED strip lighting? To get your strip light working, connect the transformer / driver to the strip light ( extending the cable with 2 core flex if necessary). Then you connect your transformer / driver to the mains via a plug or direct to the mains and you’re away.
How many lumens do I need under kitchen cabinets?
Under-Cabinet Lighting & Nearby Task Lighting (Lamps) – 175 to 550 Lumens/ ft. Distance Task Lighting (Ceiling Lighting) – 350 to 1200 Lumens/ ft. Indirect Lighting – 375 to 1200 Lumens/ ft. Signage – 500 to 1200 Lumens/ ft.
What kind of under-cabinet lighting is best?
LED Lighting Light-emitting diode (LED) lighting is the most popular and most energy-efficient type of under-cabinet lighting.
How do I choose an under cabinet light?
To minimize reflection, choose light fixtures with a lens to soften light output. Light-colored counters reflect more light than darker counterparts, making your under cabinet lights appear brighter. If you have dark counters, consider a lamp with higher lumens to achieve the desired level of light under your cabinets.
Is under counter lighting worth it?
Lower Your Energy Bill: Under cabinet lighting can actually save you money on your energy bill, and this is especially true if you opt for an LED light fixture. It has the potential to save money because you don’t have to illuminate the whole room just to get a little bit of light on the countertops below.
Is under cabinet lighting necessary?
Under cabinet lights are a key component of any kitchen design as they provide soft, ambient lighting as well as task lighting for cooking, food preparation, and reading recipes. Under cabinet lights should be installed so only the light is visible, and not the fixture itself, like the kitchen pictured to the right.
Can you leave LED light strips on all night?
Yes, LED lights are ideal for leaving on for long periods of time due to their low power usage and very low heat output. They are more suited to use as a night light/ background accent light in general.
Can you bend LED strip lights around corners?
Can LED strip lights be bent? Yes and no. You can bend standard, non-waterproof LED strip tape around corners – as long as you bend them at the ‘cut’ line. Alternatively, for trickier angles, you can cut the LED strip light and solder a wire between the separate lengths to carry the power supply.
Can you connect LED light strips together?
The easiest way to connect two LED strips together is to use a LED light strip connecting clip. Two LED strips can be joined with each other using a male to male clip. You can use these connectors to connect two strips together or even connect your LED strip to the power supply.