How To Distress Antique White Kitchen Cabinet?

How do you make white cabinets look old?

Glazing involves applying a thinned paint mixture, called a glaze, over the cabinet surfaces in order to create antique white cabinets. Glaze your cabinets.

  1. Choose a glaze.
  2. Brush the glaze onto the cabinet.
  3. Wipe off excess glaze using a cloth or paper towel.
  4. Repeat glazing until you get the desired effect.

How do you make painted cabinets look rustic?

Paint the cabinet with a coat of glaze. Glaze is a thinned-down version of paint that is available in a wide range of colors. The glaze should be a couple of shades darker or lighter than the base color, depending on the desired finish. Black or brown glaze creates a rustic look on light-colored cabinets.

How can I paint my kitchen cabinets without sanding?

How to Paint Kitchen Cabinets with ZERO Sanding Required:

  1. Wash down the cabinets with a TSP substitute to remove any grime, grease, or finger oils.
  2. Scrub down the cabinets further with Liquid Sander/Deglosser.
  3. Prime all the lower cabinets with two thin coats of primer.
  4. Paint the lower cabinets.

How do I make my kitchen cabinets look weathered?

Though you can actually distress a cabinet door, you can make the door look weathered and worn with paint, as well. You need two colors that contrast, but go well with one another. Paint one color on the cabinet doors. Once completely dry, apply a glaze tinted with the second color on top.

You might be interested:  How To Remove Kick Plates Under Kitchen Cabinet?

Who makes antique white paint?

Some brands are even known to have more than just one choice of antique white shade. Some of the most recommended brands are Benjamin Moore, Sherwin Williams, Behr, Glidden, Dulux, Johnstones, Jotun, Kelly Moore, Pratt and Lambert, Nippon Paint, Olympic, Pittsburg Pain, Valspar, and Rust-Oleum.

Can I whitewash my cabinets?

To whitewash cabinets, dip a clean paint brush in a whitewash pickling stain and apply it using smooth strokes from the bottom of the cabinet to the top and then back again. After you have applied the wash, wipe it with a clean, soft cotton cloth against the grain, This Old House describes.

Can you whitewash laminate cabinets?

These days, we don’t have to be that harsh to create whitewash finishes. You can even whitewash faux wood, if you do the proper amount of preparation. Whitewashing faux wood is simple, whether you are lightening an entire room or one small piece of furniture.

What is the difference between pickling and whitewashing?

Whitewashing is a technique that allows you to brighten your wood without hiding the grain pattern. Whitewashing is best suited for pine. Pickling is a technique best used on oak. Applying a white stain allows you to brighten a wood surface without hiding the grain pattern.

How do I make white cabinets look distressed?

Distressed Kitchen Cabinets: How To Distress Your Kitchen Cabinets

  1. Remove all of the cabinet hardware.
  2. Sand the cabinets with a sanding block.
  3. When all of the sanding is done, clean clean clean.
  4. Bust out the antiquing glaze.
  5. Apply a top coat.
  6. Let the topcoat dry for about 24 hours before you add your hardware.

Leave a Reply

Your email address will not be published. Required fields are marked *