Often asked: How Far Back Is A Kitchen Cabinet Toe Board?

How deep is a kitchen cabinet toe kick?

Toe Kick. Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches. The toe kick is an ergonomic feature which places countertops and cabinets within arm’s length.

How far back should a toe kick be?

The Importance Of Toe Kick Dimensions The average toe kick height measures 3.5-inches and the average, as well as ideal, toe kick depth measures 3-inches.

Do kitchen cabinets have to have toe kick?

Toe kick spaces are an important element of kitchen design. In fact, any cabinet that you would stand in front of should have one.

What is a cabinet toe board?

Toe kick boards are installed to protect the base cabinet. They also cover any gaps between the floor and the bottom of the cabinet created during installation. Measure the height of your toe kick, so you purchase the correct toe kick board height.

Do Ikea cabinets come with toe kick?

Legs are required to keep the cabinet boxes off of the floor. Toe kicks are optional and are not used with all legs.

You might be interested:  FAQ: Youtube How To Adjust Kitchen Cabinet Doors?

What is a kitchen cabinet toe kick?

A toe kick is the recessed space on a lower cabinet that offers room for – you guessed it – your toes. These few inches enable your feet to rest comfortably under a small section of the cabinet, allowing you to get closer to the countertop without having to hunch over.

Is a toe kick necessary?

The toe kick is an important part of any lower cabinet that you would spend time standing in front of. This includes kitchen cabinets and lower bathroom cabinets. Without a toe kick, you would have space all the way underneath, from the front of the cabinet to the wall.

What is a furniture toe kick?

Here’s a design tip that’s handy for cabinet shopping. Most kitchen cabinets are designed with a toe-kick. This is a 4” space at the bottom of the cabinet that recedes from the face to allow room for your toes (so you can stand closer to the cabinet and countertop during food preparation).

What are toe kicks made of?

They’re usually made of paint grade 3/4” plywood and can be assembled in the shop. They’re quick to install and level on site using support blocks made from scrap plywood and cedar shims. This is the preferred method for kicks on the custom cabinets that I deal with everyday.

What is a toe kick saw?

Additionally, toe kick saws are used for underlayment removal often found in kitchens that may have vinyl floors installed above. The saw will cut flush up the walls or baseboard on a 90 degree angle.

You might be interested:  FAQ: How To Make Kitchen Cabinet Boxes?

Why is it called a toe kick?

Whereas previously most standing crafts were done at tables, there developed a need for a work counter to which one could comfortably stand directly adjacent. As the name would suggest, the kick space provides a space in which one’s toes can rest.

Leave a Reply

Your email address will not be published. Required fields are marked *