Often asked: Where Do Knobs Go On Kitchen Cabinet Doors?

Where do pulls go on Shaker cabinets?

Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.

Do you use knobs or pulls on kitchen cabinets?

Traditionally knobs are used for cabinet doors and pulls are used on cabinet drawers however these days anything goes. You will often see people using knobs for drawers for consistency or based on the size of the drawers.

Where do you put handles on tall cabinet doors?

When mounting knobs on cabinet doors, place the knob in the corner of the door. When mounting pulls (handles) on cabinet doors, place the bottom hole in the upper third of the door for lower cabinets, and the upper hole in the lower third of the door for upper cabinets.

You might be interested:  FAQ: How To Chane Kitchen Cabinet To With Curved Edge To Concealed Hinges?

Can you use different size pulls on cabinets?

There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.

Should cabinet pulls be vertical or horizontal?

The thing to keep in mind with cabinet pulls has to do with placing them vertically or horizontally. Usually for cabinet door pulls, we recommend placing the pulls vertically, making it easy to open the doors (again, functionality is key).

Do you put cabinet hardware on fake drawers?

I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.

How long should Pulls be on cabinets?

While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

Can you add knobs to kitchen cabinets?

Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.

You might be interested:  Quick Answer: How To Fix A Rotating Kitchen Cabinet?

How do you open kitchen cabinets without handles?

Installed on the inside of your cabinets, a push latch is a mechanical (or magnetic) device that allows you to simply press on the cabinet door and have it spring open. No hardware is visible at all, and it will work with any most any cabinets.

How do you decide on pulls or knobs?

While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

What size cabinet pulls for 36 inch cabinets?

Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

Leave a Reply

Your email address will not be published. Required fields are marked *