Question: How Choose Hardware For Kitchen Cabinet?

How do I know what hardware to get for my kitchen cabinets?

To help you on your search for the perfect hardware for your kitchen cabinets, here are some tips to follow.

  1. Stick with the theme.
  2. Keep finishes cohesive.
  3. Know when to use knobs over pulls.
  4. Consider the color of your kitchen cabinets.
  5. Be aware of the appliances and fixtures in the kitchen.
  6. Don’t overlook quality.

Should kitchen cabinets have knobs or pulls?

Should I use knobs or pulls on kitchen cabinets? Whether you should use knobs or pulls for your kitchen cabinets is up to personal preference. Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them.

Should cabinet pulls be vertical or horizontal?

The thing to keep in mind with cabinet pulls has to do with placing them vertically or horizontally. Usually for cabinet door pulls, we recommend placing the pulls vertically, making it easy to open the doors (again, functionality is key).

You might be interested:  Readers ask: How To Install Kitchen Sink Cabinet?

What size pulls for cabinets?

While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.

Should my kitchen cabinet pulls match my faucet?

Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.

Do you put cabinet hardware on fake drawers?

I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.

Can you mix knobs and pulls in a kitchen?

Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.

Can Cup pulls be used sideways?

Pulls are another versatile option that can be installed on both cabinets and drawers. For drawers, they should be installed horizontally in the center of the door. While there is no hard-set rule for the size of your pulls, consider using longer ones on larger drawers and cabinets.

You might be interested:  Readers ask: How To Build Kitchen Cabinet?

Should drawer pulls be centered?

Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.

What size cabinet pulls for 36 inch cabinets?

Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

What size drawer needs two pulls?

Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly). Single pulls or knobs on drawers should be laterally centered and slightly higher than vertical center.

Where should pantry cabinet pulls be placed?

Cabinet Doors- On upper cabinet doors, knobs and pulls will be placed in the bottom corner opposite the hinges. On lower cabinet doors- Hardware will be placed in the upper corner opposite the hinges. Pulls typically will be placed vertically.

Leave a Reply

Your email address will not be published. Required fields are marked *