Quick Answer: What Size For Kitchen Cabinet Pulls?

What is the standard size cabinet pull?

For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.

What size handles for 36 inch cabinets?

Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

What height do you install cabinet pulls?

When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. You’ll specifically want to place them anywhere between 1” and 4” from the top or bottom edge of the door.

Should all cabinet pulls be same size?

Consistent Size Throughout There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.

You might be interested:  Readers ask: What A Good Size Tv For A Kitchen Cabinet?

Where should Pulls be placed on cabinets?

For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door. While there is no hard-set rule for the size of your pulls, consider using longer ones on larger drawers and cabinets.

Should I use knobs or pulls on kitchen cabinets?

Should I use knobs or pulls on kitchen cabinets? Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them. Pulls are a great option for drawers because your hand doesn’t have to rotate, and you can use more force underneath the whole pull.

Can you put cup pulls on cabinet doors?

Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. Just make sure not to drill any holes in your cabinetry until your mind is made up!

Can you mix cabinet pull sizes?

Although it’s definitely possible to coordinate cabinet hardware in different finishes, it’s much easier and safer to mix different shapes of knobs and pulls in one matching finish.

Do you put cabinet pulls on fake drawers?

I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.

You might be interested:  FAQ: What Kitchen Cabinet Upgrades Should You Buy?

Should drawer pulls be centered?

Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.

Are kitchen door handles standard sizes?

Standard pull handles tend to range between 3 and 4 inches (96 to 128mm) in width, with smaller T-pulls often used for small cabinets and drawers. As a rule of thumb, the larger the drawer or cabinet, the larger the handle should be.

Leave a Reply

Your email address will not be published. Required fields are marked *