Readers ask: How To Install Kitchen Cabinet Handles?

Where do you put handles on kitchen cabinets?

Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.

How do you install kitchen cabinet pulls?

For pulls (having two screws) on upper cabinets, the pull should be centered horizontally on the door stile and the bottom hole should be placed 2-1/2” up from the bottom of the door. For lower cabinets the upper hole should be placed vertically, 2-1/2” down from the top of the door.

Should I use pulls or knobs on cabinets?

There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

Should you put knobs or pulls on kitchen cabinets?

Should I use knobs or pulls on kitchen cabinets? Whether you should use knobs or pulls for your kitchen cabinets is up to personal preference. Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them.

You might be interested:  Readers ask: How To Make Primitive Kitchen Cabinet Doors?

How do you open kitchen cabinets without handles?

Installed on the inside of your cabinets, a push latch is a mechanical (or magnetic) device that allows you to simply press on the cabinet door and have it spring open. No hardware is visible at all, and it will work with any most any cabinets.

Do you put cabinet hardware on fake drawers?

I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.

Should cabinet pulls be vertical or horizontal?

The thing to keep in mind with cabinet pulls has to do with placing them vertically or horizontally. Usually for cabinet door pulls, we recommend placing the pulls vertically, making it easy to open the doors (again, functionality is key).

What size handles for 36 inch cabinets?

Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.

How do you measure for cabinet knobs?

Measure the distance between the two screws from the centre of each screw. This will give you your ‘fixing centres’ and is the measurement you need when buying your new handles. Our handles are all listed with a measurement appended to the title. This measurement is the ‘fixing centre’, NOT the total length.

Leave a Reply

Your email address will not be published. Required fields are marked *