# Readers ask: How To Measure Kitchen Cabinet?

Contents

- 1 How are cabinets measured?
- 2 How is a 10×10 kitchen measured?
- 3 What is the standard size of a cabinet?
- 4 How many linear feet are in a 10×10 kitchen?
- 5 Is a 10×10 kitchen small?
- 6 What is a 10×10 kitchen layout?
- 7 How much should a 10×10 kitchen remodel cost?
- 8 Are 42 inch cabinets too tall?
- 9 How deep should upper kitchen cabinets be?
- 10 Are kitchen cabinet doors standard size?
- 11 How many linear feet are in a kitchen cabinet?
- 12 How do you measure linear feet for kitchen cabinets?
- 13 What do kitchen cabinets cost per linear foot?

## How are cabinets measured?

Using a tape measure, determine the height of each cabinet from base to tip and the depth of each cabinet from front to rear. For accuracy, figure out the depth by measuring from the outside of each cabinet, not the inside. Standard size base cabinets have a height of 36 in (91 cm) and a depth of 24 in (61 cm).

## How is a 10×10 kitchen measured?

In short, a 10×10 kitchen is an “L” shaped kitchen that measures 10-foot by 10-foot. This is an industry standard used to determine how many cabinets you need and how much it will cost.

## What is the standard size of a cabinet?

Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.

## How many linear feet are in a 10×10 kitchen?

The 10′ x 10′ represents a kitchen with two walls of 10 feet each – or 20 linear feet (LF).

## Is a 10×10 kitchen small?

A 10×10 kitchen is a standard kitchen in size, it is a total of 20 feet of wall space. 10×10 pricing is a common method used by kitchen cabinet retailers to help customers gauge which cabinets cost less and which cost more. 1 door base cabinet with 1 full height door and no drawer. Cabinet will not have a shelf.

## What is a 10×10 kitchen layout?

A 10×10 kitchen layout is a basic, sample L-shaped kitchen design. This type of layout is used across the kitchen industry to aid customers in comparing cabinet costs of various door styles to find out which is best for your remodeling budget.

## How much should a 10×10 kitchen remodel cost?

10×10 Kitchen Remodel Cost Breakdown A 10×10 square feet kitchen can cost you between $15,000 and $30,000. If broken down to the area’s price per square foot, it will cost you between $75 and $150 per square foot.

## Are 42 inch cabinets too tall?

8 ) Good designers almost never use 42″ high wall cabinets and would NEVER use anything higher. Builders and amateurs use these heights to maximize cabinetry not realizing that the higher height looks out of proportion and gives little added space benefit.

## How deep should upper kitchen cabinets be?

How deep should the cabinet boxes be? Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.

## Are kitchen cabinet doors standard size?

What is the standard size of kitchen cabinet doors? Kitchen cabinet door heights are typically between 24 and 30 inches. If the base cabinet features a drawer, the door height below it the drawer is typically 24 inches.

## How many linear feet are in a kitchen cabinet?

The average homeowner can expect to pay $500 to $1,200 per linear foot for custom cabinets or $12,500 to $30,000 for the average kitchen with 25 linear feet.

## How do you measure linear feet for kitchen cabinets?

To calculate linear feet for kitchen cabinets, simply measure the length in inches, then divide by 12 to figure out the actual linear feet. For example, a 10′ x 10′ kitchen has two walls with 10 feet each (or 240 inches if you add them together).

## What do kitchen cabinets cost per linear foot?

Pricing wise, they’re listed in order—stock cabinets are cheapest, at around $60 to $200 per linear foot, semi-custom cabinets will run you around $100 to $650 per linear foot, and custom cabinets usually cost between $500 and $1,200 per linear foot.