Readers ask: Kitchen Cabinet Door Hinges How To Install?

How do you install cabinet hinges?

Here is a step-by-step guide of how to install traditional cabinet hinges:

  1. Mark the Door and Place the Hinges.
  2. Adjust the Spacing Between the Hinges.
  3. Tape the Hinges in Place.
  4. Drive Screws on the Cabinet-Side of the Hinge.
  5. Glue the Door to the Hinge.
  6. Drive Screws on the Door-Side of the Hinge.

Where do you put hinges on a cabinet door?

The cabinet door hinges should be placed at least 1 1/2 inches to two inches from the top of the edge of the cabinet. Alignment with the edge of the cabinet will greatly depend on the type of hinge. They could be set flush with the edge of the cabinet face or in 1/4 inch from the edge.

Can you put new hinges on old cabinets?

Unless you’re going to replace the hinges with the exact same type, you will need to cover the old holes and drill new ones. This job is best accomplished when you’re refinishing the cabinet. If the new hinges are close enough in style to the originals, you’ll want to use epoxy wood filler.

How far should hinges be from edge of cabinet door?

Lightweight cabinet doors typically need two hinges, spaced about five inches from the top and bottom edges. Tall or heavy cabinet doors may need a third hinge centered between the top and bottom hinges for additional support.

You might be interested:  Quick Answer: What To Make Kitchen Cabinet Shelves?

Do you need 3 hinges on a door?

The general rule used to determine the number of hinges is: Every door should be provided with at least one hinge for every 30 inches in height or portion thereof; however, more hinges may be required per chart below. For example, a 90″ door needs three hinges and a 91″ door needs four.

What are the types of hinges?

11 Types of Hinges

  • Ball Bearing Hinge. The ball bearing hinge has lubricated bearings between the hinge’s knuckles to reduce friction caused by heavy doors.
  • Spring-Loaded Butt Hinge.
  • Barrel Hinge.
  • Concealed Hinge.
  • Overlay Hinge.
  • Offset Hinge.
  • Piano Hinge.
  • Strap Hinge.

Can you change exposed hinges to hidden hinges?

Many older kitchens out there have exposed hinges, where you can see the hinge mounted to the cabinet frame. By swapping out that hinge for an updated, hidden hinge, the transformation can really take a space from dated to modern, just like that. Look at this amazing kitchen reveal at Everyday Enchanting.

How many hinges are needed for a cabinet door?

The number of hinges you need depends on the height and weight of the door. Use two hinges for doors less than 40 inches high and less than 11 pounds. Use three hinges for doors 40 to 60 inches high and 13 to 20 pounds. Use four hinges for doors 60 to 80 inches high and 29 to 33 pounds.

Leave a Reply

Your email address will not be published. Required fields are marked *